CS:GO and CS2 Bot Commands You Will Definitely Need

Since the birth of Counter-Strike, Bot has occupied the game. At that time, online multiplayer games were not enough speed, and Counter-Strike was played in the host mode via the local network or in the bot opponent's standalone mode.

Even today, bots are essential elements of the game. It is still possible to train with a robot alone or add a few robots to fill the blanks to create a private match with friends. But what should I do? In fact, if you want to admit this, check this article and check it out. Introducing all CS: GO bot commands!

How to Enable Bot Commands

To connect a bot command with CS: GO or CS2, you need to access the console of the game maker. The following is the procedure:

1. Enable the creator console in the game setting;
2. Open the creator console. In this game, you can find the creator console by pressing the childer button (~);
3. Enter the bot command.

Types of CSGO Bot Commands

CS: Go has all kinds of bot teams. Some work immediately, but some urgently need to launch CS: Go cheat commands. Before using a special bot command in CS: GO, you need to set sv_cheats 1 intensively. Let's try what kind of bot command can be used now.

Note that all the commands listed in the comments can be used in CS: Go, for example, CS2.

Add Bot Commands

• bot_add [Side] [Difficulty] [Name]

Side: T or CT

Difficulty: Easy, Not Bad, Not Easy, Specialist

Name: Optional; If not displayed, the bot takes a random name. However, the name must be consistent with the existing bot profile.

Bot_add is a functional command that can select the bot side, difficulty, and name. However, there is no need to apply all of them. Just install bot_add on the console and the bot is randomly added to the team. To display the command, just add the side. For example: Bot_add T command adds the first bot to the team "Terrorists". If you still want to select a specific difficulty, just specify it with the command. For example, bot_add t normal.

This command is used to select a team that assigns an appropriate bot in the bot_add command in advance. Enter either T, CT or any.

A simple command used for training in Presenter. Just enter the bot_place on the console and the bot of the player model is mechanically generated. By using it in combination with other commands, a robot can be manually placed in every space and stayed there. For example, it can be combined with the bot_Freeze command.

This command controls the maximum number of robots on the server. The default is exactly the same, but it can be changed for each change.

In addition to the normal bot_quota, you can apply the bot_quota_mode command and combine them. In fact, in the meaning, there is a function to set a match with the fill with the normal meaning. The meaning of FILL is used to set the number of robots equally from the previous command to bot_quota. The meaning of Match is that the response of humans and robots (1 person: bot_quota).

Bot will later participate in the server. This is used to balance the team when there are few players on the server.

This team is useful if you want to prohibit the participation of a specific team of human players. For example, use the mp_humanteam CT to place the human player only on the T side.

Bot Behavior Commands

This team will make the robot completely avoid you. As a result, you won't shoot you as if you were not there.

If you want to completely prohibit boots shooting, enter this command in the console. To disable, change the meaning to 0.

As already mentioned, the team can be combined with other teams for training. Enter this team to prohibit bot sorties. If you want to go, change the meaning to 0.

This team is like Bot_Freeze. When you enter, all bots end the creation of what you do. Until you release, the movement of jumps and shoots will be terminated, and the meaning will be set to zero.

When you start (1), all bots on the server parody will parody your actions. If you squat down, they squat down, and if you shoot, they will do the same, for example.

Set the meaning of this command to 1 and all bots on the server will squat down. To disable, make the meaning of 0.

This team forcibly leaves all robots from the game. It will not respond immediately to the wireless command. To return to the normal position, set the meaning to 0.

Like the Notarget team, this team will completely avoid you to all robots. However, it will be a friendly ally, and it is still the same as fighting between allies.

Make the robot in zombie mode. It is not reincarnated by a real zombie, and is eliminated by elementary and leaves.

This command is used to limit robots communication. There is an option to be installed: OFF, Little, Not Bad or Radio.

• Bot_max_vision_distance_override [value].

If you want to limit the teaching activity of your robots, you can control this with the team support provided. By default, this is equal t o-1, and you can enable it by changing the meaning to 1. This will result in the bots not seeing you when you are away.

This command disables the AI ​​of the robots, making them simply perform inactive animations.

Bot Difficulty Commands

You can manually select the difficulty when adding bots to a server, but there is a way to adjust the difficulty of all robots at once with the bot_difficulty command.

This command changes the difficulty of all robots on the server. Make sure you have established the meaning you want with this command.

Value options

• sv_bots_get_harder_after_each_wave

When this feature is enabled, the bots get harder after each wave.

If you want the bots to get easier after each round win, use a higher team.

This command is used for the final difficulty of the bots. The value options are the same as the bot_difficulty command, with 0 being lightweight and 3 being expert. So if you want to make the match more exciting, you can use player_botdifflast_s 3 to increase the difficulty of the last bots, making it harder for human players to join.

• bot_autodifficulty_treshold_high [value].

This command is used to set the difficulty to the highest value. By default, the difficulty is 5, which means min = -20, max = -20.

• bot_autodifficulty_treshold_low [value].

This command is used to set the difficulty to a low value. The default difficulty is 5, min = 20, max = 20.

Besides the normal weapon commands, there are weapon commands that only affect robots. Try them out!

Use this command to make all robots on your server use only knives.

This command allows you to set the ammunition for weapons that bots spawn with. To do this, you need to use the correct weapon command. If you are not sure which command applies to which weapon, look for the required command in the weapon command manager.

This command makes the robot buy a random weapon based on the current balance. Setting the value to 0 will allow the robot to pick up the weapon correctly.

This team will take the robot out of the in-game economy and force it to buy a weapon every round.

A value of 1 will allow the bot to use grenades. Change to 0 if you want to disable it.

A value of 1 will allow the bot to use revolvers. Change to 0 if you want to disable it.

A value of 1 will allow the bot to use shotguns. Change to 0 if you want to disable it.

If the meaning is set to 1, the boots can apply a submachine gun. If you want to disable, change the meaning to 0.

If meaning 1 is set, the boots can apply a machine gun. If you want to disable it, change the meaning to 0.

If meaning 1 is set, the boots can use a machine gun. If you want to disable, change the meaning to 0.

If meaning 1 is set, the boots can use a sniper. If you want to disable, change the meaning to 0.

If you want to train a pistol vs. Robot, you can use a revolver with this team's support. If you want to disable it, make the meaning of 0.

This team has the ability to require AW P-dedicated cards such as AWP_INDIA. With the introduction of bot_snipers_only 1, other guns can hardly be applied, and no sniper guns are counted.

Sniper rifles are not counted. The team postponed all previous commands so that the bot can r e-apply all guns.

• Specify Sv_bot_buy_grenade_change [value].

This command is used to set up the opportunity for robots to acquire grenades in other resources. This means that it can be set in the range of 0 to 100, and 100 means that the probability of acquiring a grenade robot is 100%.

• sv_bot_buy_hegrenade_weight [weight].

I don't know which grenade to buy when the bot gets grenades. In order to eliminate randomness, you can set authority for each grenade. This command is set in the grenade in advance. The greater this weight, the more likely it is to get grenades.

• sv_bot_buy_molotov_weight [Weight].

Just like the previous team, set only the weights you want to set on the hammer.

Set the authority (probability) to acquire a bot from the smoke grenade.

As in the previous three cases, you can set a chance to acquire boots from smoked grenade, changing the meaning of weight.

Use this command to set a chance to get a grenade grenade bot.

This team assigns armor to the bot according to the price. If 1 is Kevler, 2 is Kevler + Helmet.

Bot DeathMatch Commands

If you want to make a personal DM server, you need a correct seven teams.

This team will be forcibly reborn all CTs.

The team forcibly drows down all TTs.

As the name suggests, the team is elementally avoided the victory in the round.

The team allows the player or bot to buy it in all spaces on the map, regardless of whether or not it exists in the acquisition zone.

This team delays the rules of the acquisition period and you can buy it in all times. Set a great first step so that the timer does not end.

This team does not allow boots to execute the script.

The team does not collect scenario items by bots.

Bot CO-OP Commands

• bot_coop_idle_max_vision_distance [value].

Usually, the maximum visual distance that the bot may see the enemy is 1400, which is the default value of this command. This meaning can be increased or decreased. The team works for unused robots in the cooperative mission.

• bot_coop_force_throW_Grenade_change [value].

To have a robot thrown a grenade, just enter the above command. 0, 9 means that the probability of a robot to throw a grenade is 90%.

• mp_coopmission_bot_difficalTy_offset [value].

During the CO-OP mission, you can change the difficulty level of the robot. Since the default value is set to 0, it can be easily raised to the value that suits you.

Kick Bot Commands

This command deletes all robots from the game. By using this command, you can quickly send all robots from the server.

Next, you can kick a specific robot by specifying the command name. Change name to the name of the robot you want to kick.

This team kicks all terrorist robots.

With this command, you can kick all the ant i-terrorist robots.

When you enter bot_kick, all robots are deleted from the server. However, if you combine it with a certain side, you can kick only the necessary robots by filtering the robot. This is similar to the bot address command, and you can kick a troubled robot. If you want to defeat all robots with normal difficulty, enter bot_kick 1.

Unlike the bot_kick command, this command destroys the robot, but does not delete it from the server. This basically means that all robots are attracting attention in the same round. Like the previous command, the same point applies the choice of which robot to kill. For example, Bot_kill Normal destroys all robots with normal difficulty.

If you want to know more, please see the article on how to kick the robot with CS: Go!

Other Bot Commands CS:GO

This command moves the bot to the highlighted navigation zone.

This command is similar to the previous command: Move the bot to your current favorite area.

This command adds a tracer to the bot cross hair. In other texts, you can see the bot's command is drawn on the screen.

This command specifies the navigation grid of each bot.

This command usually marks the area on the map first encountered by bots and players. It is literally perfect for aristocrats where you can explore the new map 'hot spot' or wait for an enemy to encounter in an online match.

Like its predecessor, this command is also useful for training. It opens a screen on the screen that shows the areas on the map where CT and T have a high chance of taking the initiative.

This command simply turns on the bot debugging function.

The above command is also used to debug the robot's probabilities, but you will probably never use it, as it is used for presenter tests, etc.

Did you like the explanation of bot commands in CS:GO? All teams are divided into categories and are easy to find. If this comment was helpful, check out the view model issue list.

Trade on the go - install the DMarket mobile app from Google Play or the App Store. Never miss out on profitable prizes and original skins. The best trading platform for CS:GO, Dota 2, Rust and TF2 is always at your fingertips!

If you want to deepen your knowledge and understand more than just how to kick a robot in CS:GO, read the DMarket blog, find other necessary controls and follow us on Facebook and Twitter to never miss new and fascinating information.

DMarket is the world's first cross-game platform based on blockchain and smart contracts, allowing you to sell, change and price any virtual item for any game on any platform with one click. DMarket's mission is to discover new clusters of the game economy, worth more than $450 billion, and make virtual item trading accessible to more than 2. 3 billion computer players around the world.